طاحونة معملية لتطوير المنتج وإنتاج الأصغر

طحن وتشتيت رطب مع مطاحن الخرز الخلاطة المعملية من سلسلة الميني

عام

MiniSeries

The compact, universally applicable laboratory circulation mills of the MiniSeries impress with easy handling and the use of small quantities from 0.25 to 0.5 l for product sizes down to the nanometer range. Within a short time it is possible to conduct many tests with low product loss and significant results. You are saving time and costs for your product development.

The laboratory mills of the MiniSeries are available in three different material designs:

The MiniCer® and MiniPur enable metal free fine grinding of your high quality products. All grinding chamber parts of the MiniCer® are of wear resistant NETZSCH-Ceram Z or NETZSCH-Ceram C/NETZSCH-Ceram N or in the case of the MiniPur of NElast.

For the universally applicable agitator bead mill MiniFer all grinding chamber parts are of stainless steel. You can process small product batches in continuous pass and circulation operation or in an enclosed, discontinuous batch operation.

MicroSeries

Finest wet grinding technology – the laboratory mills of the MicroSeries  are an investment in the future for new product developments of different fields of application of pigmented ink jets, technical ceramics, cosmetics, pharmaceutical applications and nano-scale high-tech products. The improved centrifugal separation system of the worldwide known peg grinding system Zeta® enables the use of very small grinding media for grinding and dispersing of minimal product batch quantities.

The laboratory mills of the MicroSeries  are available in three different material designs:

  • MicroFer all grinding chamber parts are of stainless steel
  • for metal-free fine grinding the MicroCer® (NETZSCH-Ceram Z or NETZSCH-Ceram C/NETZSCH-Ceram N design) is available  for solvent-based or the MicroPur (NElast design) for water-based products

التقنية

  • نظام طحن- Zeta®، مع نظام فصل نتابذ مطور
  • مناسبة لتشغيل تمرير ودوران مستمر، وفى حالة MiniCer® وMiniFer التشغيل بالوجبة المغلقة ممكنة أيضا
  • يسهل خزان الطحن الدوار تعبئة وتفريغ وسائط الطحن
  • تشغيل سهل ونظيف
  • سدادة ميكانيكية عاملة باتجاهين مع وحدة شطف ومفتاح أمان
  • محرك كهربي بواسطة مغير تردد 600 إلى 4200 دورة/دقيقة
  • مضخة خرطوم بسرعة انضباطية لانهائية، كمية التلقيم 1.3 إلى 133 لتر في للساعة
  • يمكن قلب ماكينة سلسلة الميني إلى حجم أصغر من سلسلة الميكرو

MiniPur and MiniCer®:

  • حجرة طحن قابلة للتبريد (فقط MiniCer®) وخزان منتج قابل للتبريد (فقط MiniPur)
  • استخدام أصغر وسائط الطحن من 0.5 إلى 2 مم
  • طحن ناعم خالي من الفلزات لأصغر أحجام الوجبات فى مجالات: علوم الحياة، سيراميك تقنية عالية، و مواد النانو.....إلخ.

MiniFer:

  • جميع أجزاء حجرة الطحن من الستينلس ستيل
  • مرشحات فصل مجهزة بالليزر بمختلف تصاميم سعة الفجوة تتيح استخدام أصغر وسائط الطحن فى نطاق قطري من 0.0 إلى 2 مم

MicroSeries

  • Zeta®-grinding system with improved centrifugal separation system
  • The MicroSeries is available in three different material designs
  • Flexible mode of operation – all machines of the MicroSeries are suitable for continuous pass and circulation operation, in case of the MicroCer® and MicroFer an enclosed batch operation is also possible
  • Use of smallest grinding media from 0.05 - 0.8 mm for grinding down to the nanometer range
  • Lowest loss of product at minimal use of product
  • Swiveling grinding tank facilitates the operation of the machine
  • The machines of the MicroSeries are convertible to the bigger volume of the MiniSeries – for more flexibility regarding the product batch quantities
Laboratory agitators bead mill MiniCer – easy handling also for smallest product batches
Three material designs of the MicroSeries: stainless steel as well as zirconium oxide and polyurethane design for metal-free fine grinding

التطبيقات


أدبيات

Brochure

Brochure

[Translate to Arabic:] Due to the improved centrifugal separation system the use of smallest grinding media is possible in the laboratory mills of the Mini- and MicroSeries. This technology guarantees wet grinding of small product batches to the nanometer range.

Brochure

[Translate to Arabic:] NETZSCH-Feinmahltechnik GmbH offers mixing, kneading and dispersing machines for low- to high-viscosity products as well as a variety of wet-grinding units for reduction into the nanometer range, tailor-made for each application. When it comes to the processing of dry products by cutting, fine grinding or fine classification, you will find a wealth of experience and an equally varied program of fine-impact mills, classifier and jet mills as well as fine-cutting mills and high-performance fine classifiers.

Application literature

Application literature

[Translate to Arabic:] Laboratory machines, designed for mixing, dispersing, kneading and wet grinding as well as de-aeration are well established as a part of wet grinding technology equipment. Their applications range from the development of new products or processing small batches of high-tech materials to quality control or assurance and process optimization.

Application literature

[Translate to Arabic:] Due to the possibility to achieve higher product homogeneity, strength or solubility and thus higher product qualities by the use of submicron particles the versatility of fields of applications is continuously increasing.

فيديوهات

NETZSCH Laboratory Mill MiniCer® NETZSCH-Feinmahltechnik GmbH

قد تكون مهتمًا أيضًا بـ:

طاحونة الخرز الخلاطة المخبرية LabStar

The multi-functional laboratory mill LabStar enables scientific academic work even at difficult research and development tasks and convinces by easy handling. The laboratory mill LabStar is the smallest grinding unit of NETZSCH-Feinmahltechnik GmbH that enables an exact scale-up to comparable production machines.

® NETZSCH Alpha® - الجيل القادم من مطاحن الخرز الرجراجة

NETZSCH-Feinmahltechnik GmbH has now developed the new Alpha® modular machine platform. Compared to earlier-generation machines, this series is designed such that different grinding systems can be mounted on the same base platform as appropriate for a defined drive capacity.

مطحنة النانو ZETA® RS

Specially designed for grinding and dispersing to the nanometer range. This new development combines easy handling and revolutionary machine technology with ergonomic design.