Pigment Production

The ultra-fine grinding of pigments places high demands on the machine technology to be employed. The finest, absolutely grit-free granulation, low-residue processing with minimal contamination, as well as fast, thorough cleaning when switching products are the minimum requirements.


Wet Grinding

Products & Solutions in the field of Wet Grinding
The next Generation of Agitator Bead Mills

NETZSCH-Feinmahltechnik GmbH has now developed the new Alpha® modular machine platform. Compared to earlier-generation machines, this series is designed such that different grinding systems can be mounted on the same base platform as appropriate for a defined drive capacity.

Nano mill Zeta® RS

Specially designed for grinding and dispersing to the nanometer range. This new development combines easy handling and revolutionary machine technology with ergonomic design.

Horizontal disk mill System TetraNex® Type Discus

The disk grinding system sets new benchmarks regarding capacity and flexibility. You profit from well-engineered technology that has already been proved for processing different products.

NETZSCH Omega®

Successful dispersion requires targeted force in order to separate agglomerated particles. The Omega® Economic Disperser applies dispersive forces then and there, where they are especially effective: in the Omega® disperser body, energy is transformed into very high speeds under pressure.

MasterMill Submersible Basket Mill

The MasterMill (Premier PSM) Submersible Basket Mill is an exceptionally versatile dispersion system that can be applied to a wide range of processing industries.

Laboratory agitator bead mill MiniZeta

The universally applicable laboratory circulation mill MiniZeta is essential for research and development. Its easy operation, equipped with easy to clean tools of stainless steel, achieves the machine excellent results down to the Sub-Micron range.

Laboratory agitator bead mill LabStar

The multi-functional laboratory mill LabStar enables scientific academic work even at difficult research and development tasks and convinces by easy handling. The laboratory mill LabStar is the smallest grinding unit of NETZSCH-Feinmahltechnik GmbH that enables an exact scale-up to comparable production machines.

MiniSeries / MicroSeries - Laboratory Mills for Product Development of Smallest Batches

The compact, universally applicable laboratory circulation mills of the MiniSeries impress with their easy handling when processing very small quantities from 0.25 to 0.5 l up to particle sizes in the nanometer range. It is possible to conduct many tests with low loss of product and significant results within a short period of time.

Finest wet grinding technology – the laboratory mills of the MicroSeries are an investment in the future for new product developments of different fields of application of pigmented ink jets, technical ceramics, cosmetics, pharmaceutical applications and nano-scale high-tech products.

NETZSCH Omega® 60

Successful dispersion requires targeted force in order to separate agglomerated particles. The Omega® Economic Disperser applies dispersive forces then and there, where they are especially effective: in the Omega® disperser body, energy is transformed into very high speeds under pressure.


Dry Grinding

Products & Solutions in the field of Dry Grinding
CGS Fluidized Bed Jet Mill

The combination of an air jet mill and a dynamic air classifier represent fine dry grinding in perfection. The highest of final finenesses with an exact maximum particle size limitation become reproducible. The development of the new e-Jet® and s-Jet® grinding methods constantly yields new, interesting areas of application, both economically and technically. Applicable for finenesses from 1 to 70 µm (d97).

Machine sizes available for grinding air volumes from approx. 50 to 12,000 Nm³/h.

ConJet® High-Density Bed Jet Mill

The ConJet® high-density bed jet mill is a spiral jet mill combined with a patented dynamic air classifier. This classifier enables the ConJet® to achieve highest finenesses independent of the product load, and therefore also highest throughput rates. Applicable for finenesses from 2.5 to 70 µm (d97).

Machine sizes available for grinding air volumes from approx. 50 to 2,400 Nm³/h.

Impact Mill Condux®

The mechanical fine impact mill or centrifugal mill is usually operated in the form of a pin disc mill, blast mill, wing beater mill or grooved disc mill. Many products and finenesses for a wide variety of applications are processed with the universal mill, with a wide range of rotor and stator combinations that can be easily changed. Applicable for finenesses from 30 to 800 µm (d97).

Machine sizes with drive capacities from 1.1 - 250 kW and air volume of approx. 140 - 31,000 Nm³/h.

CSM Classifier Mill

The dynamic air classifier integrated into the grinding chamber housing of this fine impact mill manufactures fine particle sizes with a defined maximum particle size limitation. Internal classification of the coarse material results in a more stable and energy efficient process than a mill with an external classification circuit. Applicable for finenesses from 10 to 150 µm (d97).

Machine sizes with drive capacities from 1.5 - 250 kW and air volume of approx. 50 - 26,000 Nm³/h.

CGS 10 and CGS 16 Fluidized Bed Jet Mills

The smallest jet mills for virtually contamination-free fine grinding with an integrated classifier wheel – highest finenesses also achievable with the hardest of products.

For finenesses from 2.5 to 70 µm (d97).

Machine sizes with grinding air capacities of approximately 35 to 125 Nm³/h.

ConJet® 10 and ConJet® 16 High-Density Bed Jet Mills

A new interpretation of the spiral jet mill – with grinding finenesses adjusted by an integrated air classifier – for even steeper particle size distributions.

For finenesses from 2.5 to 70 µm (d97).

Machine sizes with grinding air capacities of approximately 35 to 125 Nm³/h.

Impact Mill Condux® 60

The universal laboratory mill – flexible, easy to operate! For a high variety of products and finenesses.

For finenesses from 30 to 800 µm (d97).

Machine size with grinding air capacity of approximately 70 to 280 Nm³/h.

CSM 50 and CSM 80 Classifier Mill

The mechanical impact mill with highly developed classifying technology – solid, robust, precise upper particle size limitation.

For finenesses from 10 to 150 µm (d97).

Machine size with grinding air capacity of approximately 100 to 180 Nm³/h.

s-Jet® 25 Laboratory-Scale-Steam Jet Mill

The s-Jet® System (patent pending) is a new innovation in a line of consistent developments being made in the area of air jet milling. Final finenesses in the submicron range (example: d50 0.2 µm) can now be achieved with fluidized bed jet mills. As opposed to conventional dry grinding processes with fluidized bed jet mills, the s-Jet® System uses superheated steam as its milling gas.

LabPilotPlant

Truly a flexible laboratory system – with reproducible results – variable for ultra-fine grinding and classifying – for laboratory operations or the continuous production of small batches!


Mixing and De-Aerating

Products & Solutions in the field of Mixing and De-Aerating
Ψ-Mix® Inline Disperser

The Ψ-Mix® inline disperser is a revolutionary system for mixing and dispersing solids in liquids. Homogeneous, fine dispersions with exactly reproducible quality are achieved through a controlled, emission-free process.

PMD / PMD-VC Intensive Mixers

For processing large batches of moderate- to high-viscosity product, the PMD and PMD-VC intensive mixers are the machines of choice. The stationary mixing and dispersing units are successfully utilized primarily in the paint, printing ink and pigment industries.

MasterMix® Dissolver

The NETZSCH MasterMix® dissolvers are fast, high-powered dispersing units for simple mixing tasks. They can easily process products with viscosities up to 100 Pa·s from a broad range of applications.

MaxShear Inline Disperser

Compact enough to be included at virtually any point in your process. The self-pumping portable unit features rotor/stator based technology with multiple stator configurations available.

ShearMaster Laboratory Dissolver

The ShearMaster laboratory dissolver is designed for batch sizes of 1 to 10 l and is equipped with a 1.1 kW variable speed drive.

Laboratory De-Aerator MiniVac

The MiniVac laboratory-scale De-Aerator was specially developed for small batches or initial tests and – like the production-scale NETZSCH vacuum de-aerator – operates according to the VTR principle (vacuum - thin film - rotary process). With extreme ease of operation you can remove micronized pockets of gas and air from free-flowing products of various viscosities as well as from viscous pastes and compounds.

Micro Ψ-Mix® Laboratory Inline Disperser

With the laboratory-scale version of the successful Ψ-Mix® Inline Disperser you can rely on innovative dispersion technology with emission-free inline operation for optimal wetting of powders in liquids.

PMH 1 / PML 1 Laboratory Planetary Mixer

For challenging mixing tasks involving small quantities of high- and medium-viscosity products, our PMH 1 or PML 1 Laboratory Planetary Mixer is the machine for you. The compact table-top model provides for ease of operation and homogeneous mixing and de-aeration of your product.


Classifying

Products & Solutions in the field of Classifying
Bora - Air turbo classifiers

Bora air turbo classifiers have been developed specially for ultra-fine products with high added value.

CFS/HD-S High-efficiency Fine Classifier

The requirements of many product applications such as improved separation sharpness and finer cut points, are no problem for the CFS/HD-S range of High-efficiency Fine Classifiers.

Thanks to the maximum predispersion of the product to be classified, the targeted cut point and sharpness of cut can be optimized distinctly.

Available for finenesses from 2.5 to 60 µm (d97).

Machine sizes available for gas volume from approximately 50 to 16.000 Nm³/h.

InlineStar High-performance Fine Classifier

This newest fine classifier was conceived to combine with an upstream mill. The direct integration of the InlineStar classifier behind a mill creates a continuous grinding/classifying plant that reduces the number of required plant components.

Available for separation limits from 2.5 to 60 µm (d97).

Machine sizes available for gas volume from approximately 350 to 2.600 Nm³/h.

CFS 5 and CFS 8 Fine Classifiers

Efficient separation of grain sizes and effective results for both coarse material and fine material separation.

For separation limits from 10 to 250 µm (d97).

Machine sizes with gas volume of approximately 25 to 145 Nm³/h.

CFS 5 HD-S and CFS 8 HD-S High-efficiency Fine Classifiers

The smallest for the finest – exact separation results for superfine powder through best possible product classification with the sharpest separation and maximum gains.

For separation limits from 2.5 to 60 µm (d97).

Machine sizes with gas volume of approximately 25 to 145 Nm³/h.


NETZSCH-Beads®

Products & Solutions in the field of NETZSCH-Beads®
SteelBeads Micro

Hardened steel grinding beads made of roller bearing steel

SteelBeads Q

Food grade chromium steel grinding beads, W 1.3505

SteelBeads HQ

Cast steel grinding beads of tempered carbon steel

GlassBeads

GlassBeads are bubble-free glass grinding beads with a density of 2.5 kg/l. They are especially recommended for wet grinding applications in the low to medium viscosity range.

ZetaBeads®

Yttrium-stabilized zirconium oxide grinding beads (Standard quality)

ZetaBeads® Plus

Yttrium-stabilized zirconium oxide grinding beads (High-end quality)

ZetaBeads® Nano

Yttrium-stabilized zirconium oxide grinding beads (High-end quality) for nano applications

CeraBeads

Cerium-stabilized zirconium oxide grinding beads (Standard quality)

ZsBeads

Zirconium silicate grinding beads