Graphite

In addition to diamond and fullerene, graphite is the third modification of carbon. The metallic gray mineral occurs frequently in nature, usually crystallizes in the hexagonal crystal system and has a layer structure. This crystal structure results in material characteristics that make graphite of interest for many applications: very good electrical and thermal conductivity, excellent lubricant properties and high temperature and oxidation resistance.


Dry Grinding

Products & Solutions in the field of Dry Grinding
Impact Mill Condux®

The mechanical fine impact mill or centrifugal mill is usually operated in the form of a pin disc mill, blast mill, wing beater mill or grooved disc mill. Many products and finenesses for a wide variety of applications are processed with the universal mill, with a wide range of rotor and stator combinations that can be easily changed. Applicable for finenesses from 30 to 800 µm (d97).

Machine sizes with drive capacities from 1.1 - 250 kW and air volume of approx. 140 - 31,000 Nm³/h.

CGS Fluidized Bed Jet Mill

The combination of an air jet mill and a dynamic air classifier represent fine dry grinding in perfection. The highest of final finenesses with an exact maximum particle size limitation become reproducible. The development of the new e-Jet® and s-Jet® grinding methods constantly yields new, interesting areas of application, both economically and technically. Applicable for finenesses from 1 to 70 µm (d97).

Machine sizes available for grinding air volumes from approx. 50 to 12,000 Nm³/h.

s-Jet® Steam Jet Mill

The s-Jet® System (patent pending) is a new innovation in a line of consistent developments being made in the area of air jet milling. Final finenesses in the submicron range (example: d50 0.2 µm) can now be achieved with fluidized bed jet mills. As opposed to conventional dry grinding processes with fluidized bed jet mills, the s-Jet® System uses superheated steam as its milling gas.

ConJet® High-Density Bed Jet Mill

The ConJet® high-density bed jet mill is a spiral jet mill combined with a patented dynamic air classifier. This classifier enables the ConJet® to achieve highest finenesses independent of the product load, and therefore also highest throughput rates. Applicable for finenesses from 2.5 to 70 µm (d97).

Machine sizes available for grinding air volumes from approx. 50 to 2,400 Nm³/h.

CSM Classifier Mill

The dynamic air classifier integrated into the grinding chamber housing of this fine impact mill manufactures fine particle sizes with a defined maximum particle size limitation. Internal classification of the coarse material results in a more stable and energy efficient process than a mill with an external classification circuit. Applicable for finenesses from 10 to 150 µm (d97).

Machine sizes with drive capacities from 1.5 - 250 kW and air volume of approx. 50 - 26,000 Nm³/h.

CGS 10 and CGS 16 Fluidized Bed Jet Mills

The smallest jet mills for virtually contamination-free fine grinding with an integrated classifier wheel – highest finenesses also achievable with the hardest of products.

For finenesses from 2.5 to 70 µm (d97).

Machine sizes with grinding air capacities of approximately 35 to 125 Nm³/h.

s-Jet® 25 Laboratory-Scale-Steam Jet Mill

The s-Jet® System (patent pending) is a new innovation in a line of consistent developments being made in the area of air jet milling. Final finenesses in the submicron range (example: d50 0.2 µm) can now be achieved with fluidized bed jet mills. As opposed to conventional dry grinding processes with fluidized bed jet mills, the s-Jet® System uses superheated steam as its milling gas.

ConJet® 10 and ConJet® 16 High-Density Bed Jet Mills

A new interpretation of the spiral jet mill – with grinding finenesses adjusted by an integrated air classifier – for even steeper particle size distributions.

For finenesses from 2.5 to 70 µm (d97).

Machine sizes with grinding air capacities of approximately 35 to 125 Nm³/h.

CSM 80 Classifier Mill

The mechanical impact mill with highly developed classifying technology – solid, robust, precise upper particle size limitation.

For finenesses from 10 to 150 µm (d97).

Machine size with grinding air capacity of approximately 100 to 180 Nm³/h.

LabCompactPlant

The LabCompactPlant was designed especially for the production of laboratory and small batches. Naturally, the daily demands of laboratory operations were taken into consideration when the details of the plant construction were being planned.

LabPilotPlant

Truly a flexible laboratory system – with reproducible results – variable for ultra-fine grinding and classifying – for laboratory operations or the continuous production of small batches!

Impact Mill Condux® 60

The universal laboratory mill – flexible, easy to operate! For a high variety of products and finenesses.

For finenesses from 30 to 800 µm (d97).

Machine size with grinding air capacity of approximately 70 to 280 Nm³/h.


Classifying

Products & Solutions in the field of Classifying
CFS Ultra-Fine Classifier

When a screening machine cannot be used, due to its separation limitations:

With our „standard“ ultra-fine classifier, CFS, fine powders can be cleanly classified. High performance classification and efficient results are valid for both coarse material and the separation of fines.

Available for finenesses from 10 to 250 µm (d97).

Machine sizes available for gas volume from approximately 50 to 16.000 Nm³/h.

CFS/HD-S High-efficiency Fine Classifier

The requirements of many product applications such as improved separation sharpness and finer cut points, are no problem for the CFS/HD-S range of High-efficiency Fine Classifiers.

Thanks to the maximum predispersion of the product to be classified, the targeted cut point and sharpness of cut can be optimized distinctly.

Available for finenesses from 2.5 to 60 µm (d97).

Machine sizes available for gas volume from approximately 50 to 16.000 Nm³/h.

InlineStar High-performance Fine Classifier

This newest fine classifier was conceived to combine with an upstream mill. The direct integration of the InlineStar classifier behind a mill creates a continuous grinding/classifying plant that reduces the number of required plant components.

Available for separation limits from 2.5 to 60 µm (d97).

Machine sizes available for gas volume from approximately 350 to 2.600 Nm³/h.

CFS 5 and CFS 8 Fine Classifiers

Efficient separation of grain sizes and effective results for both coarse material and fine material separation.

For separation limits from 10 to 250 µm (d97).

Machine sizes with gas volume of approximately 25 to 145 Nm³/h.

CFS 5 HD-S and CFS 8 HD-S High-efficiency Fine Classifiers

The smallest for the finest – exact separation results for superfine powder through best possible product classification with the sharpest separation and maximum gains.

For separation limits from 2.5 to 60 µm (d97).

Machine sizes with gas volume of approximately 25 to 145 Nm³/h.


Wet Grinding

Products & Solutions in the field of Wet Grinding
The next Generation of Agitator Bead Mills

NETZSCH-Feinmahltechnik GmbH has now developed the new Alpha® modular machine platform. Compared to earlier-generation machines, this series is designed such that different grinding systems can be mounted on the same base platform as appropriate for a defined drive capacity.

Horizontal disk mill System TetraNex® Type Discus

The disk grinding system sets new benchmarks regarding capacity and flexibility. You profit from well-engineered technology that has already been proved for processing different products.

Circulation mill system Type Zeta®

The circulation grinding system for all fields of application. Suitability for all viscosities and nearly all products is achieved with different grinding media from 90 µm to 3 mm. This provides highest product qualities and fineness down to the nanometer range.

MicroSeries - Flexible Laboratory Mills for Processing Smallest Quantities

Finest wet grinding technology – the laboratory mills of the MicroSeries are an investment in the future for new product developments of different fields of application: from pigmented ink jets, technical ceramics, cosmetics and pharmaceutical applications to nano-scale high-tech products.

Laboratory agitator bead mill LabStar

The multi-functional laboratory mill LabStar enables scientific academic work even at difficult research and development tasks and convinces by easy handling. The laboratory mill LabStar is the smallest grinding unit of NETZSCH-Feinmahltechnik GmbH that enables an exact scale-up to comparable production machines.

MiniSeries - Laboratory Mills for Product Development and Production of Smallest Batches

The compact, universally applicable laboratory circulation mills of the MiniSeries impress with their easy handling when processing very small quantities from 0.25 to 0.5 l up to particle sizes in the nanometer range. It is possible to conduct many tests with low loss of product and significant results within a short period of time.


Mixing and De-Aerating

Products & Solutions in the field of Mixing and De-Aerating
ShearMaster Laboratory Dissolver

The ShearMaster laboratory dissolver is designed for batch sizes of 1 to 10 l and is equipped with a 1.1 kW variable speed drive.


NETZSCH-Beads®

Products & Solutions in the field of NETZSCH-Beads®
ZetaBeads®

Yttrium-stabilized zirconium oxide grinding beads (Standard quality)

ZetaBeads® Plus

Yttrium-stabilized zirconium oxide grinding beads (High-end quality)

ZetaBeads® Nano

Yttrium-stabilized zirconium oxide grinding beads (High-end quality) for nano applications

CeraBeads

Cerium-stabilized zirconium oxide grinding beads (Standard quality)

ZsBeads

Zirconium silicate grinding beads