Metals

Metals and their alloys are almost as old as the history of mankind and have had a lasting effect on our culture. For this reason, certain periods in the history of mankind have been named after the materials used, such as the Bronze Age or the Iron Age. 

Metals are the chemical elements that, in their pure form, exhibit the following four material characteristics: electrical conductivity, which decreases with increasing temperature, high thermal conductivity, plasticity (ductility) and metallic sheen. Metals are traditionally classified as heavy or light according to their density and as precious or base according to their reactivity.


Wet Grinding

Products & Solutions in the field of Wet Grinding
NETZSCH Alpha® - The next Generation of Agitator Bead Mills

NETZSCH-Feinmahltechnik GmbH has now developed the new Alpha® modular machine platform. Compared to earlier-generation machines, this series is designed such that different grinding systems can be mounted on the same base platform as appropriate for a defined drive capacity.

Circulation mill system Zeta® Type LMZ

The circulation grinding system for all fields of application. Suitability for all viscosities and nearly all products is achieved with different grinding media from 90 µm to 3 mm. This provides highest product qualities and fineness down to the nanometer range.

Batch mill Type PRK

The new generation of PRK agitator bead mills enables for the first time a constant circulation grinding of carbide suspensions. You achieve highest product qualities at exact reproducibility and easy cleanability.

IsaMill

The largest continuous working disk agitator bead mills in the world are used for ore preparation.

MiniSeries - Laboratory Mills for Product Development and Production of Smallest Batches

The compact, universally applicable laboratory circulation mills of the MiniSeries impress with their easy handling when processing very small quantities from 0.25 to 0.5 l up to particle sizes in the nanometer range. It is possible to conduct many tests with low loss of product and significant results within a short period of time.

NETZSCH Omega®

Successful dispersion requires targeted force in order to separate agglomerated particles. The Omega® Economic Disperser applies dispersive forces then and there, where they are especially effective: in the Omega® disperser body, energy is transformed into very high speeds under pressure.

NETZSCH Omega® 60

Successful dispersion requires targeted force in order to separate agglomerated particles. The Omega® Economic Disperser applies dispersive forces then and there, where they are especially effective: in the Omega® disperser body, energy is transformed into very high speeds under pressure.

MicroSeries - Flexible Laboratory Mills for Processing Smallest Quantities

Finest wet grinding technology – the laboratory mills of the MicroSeries are an investment in the future for new product developments of different fields of application: from pigmented ink jets, technical ceramics, cosmetics and pharmaceutical applications to nano-scale high-tech products.

Laboratory batch mills PE 075 / PR 01 and PE 5 / PR 1 S

The periodically working agitator bead mills PE 075 / PR 01 and PE 5 / PR 1 S are the most improved and simpliest grinding units of NETZSCH-Feinmahltechnik GmbH. These laboratory machines work with both – the well-known MoliNex- and attritor system.

Laboratory agitator bead mill LabStar

The multi-functional laboratory mill LabStar enables scientific academic work even at difficult research and development tasks and convinces by easy handling. The laboratory mill LabStar is the smallest grinding unit of NETZSCH-Feinmahltechnik GmbH that enables an exact scale-up to comparable production machines.


Dry Grinding

Products & Solutions in the field of Dry Grinding
CGS Fluidized Bed Jet Mill

The combination of an air jet mill and a dynamic air classifier represent fine dry grinding in perfection. The highest of final finenesses with an exact maximum particle size limitation become reproducible. The development of the new e-Jet® and s-Jet® grinding methods constantly yields new, interesting areas of application, both economically and technically. Applicable for finenesses from 1 to 70 µm (d97).

Machine sizes available for grinding air volumes from approx. 50 to 12,000 Nm³/h.

ConJet® High-Density Bed Jet Mill

The ConJet® high-density bed jet mill is a spiral jet mill combined with a patented dynamic air classifier. This classifier enables the ConJet® to achieve highest finenesses independent of the product load, and therefore also highest throughput rates. Applicable for finenesses from 2.5 to 70 µm (d97).

Machine sizes available for grinding air volumes from approx. 50 to 2,400 Nm³/h.

CFS/HD-S High-efficiency Fine Classifier

The requirements of many product applications such as improved separation sharpness and finer cut points, are no problem for the CFS/HD-S range of High-efficiency Fine Classifiers.

Thanks to the maximum predispersion of the product to be classified, the targeted cut point and sharpness of cut can be optimized distinctly.

Available for finenesses from 2.5 to 60 µm (d97).

Machine sizes available for gas volume from approximately 50 to 16.000 Nm³/h.

s-Jet® Steam Jet Mill

The s-Jet® System (patent pending) is a new innovation in a line of consistent developments being made in the area of air jet milling. Final finenesses in the submicron range (example: d50 0.2 µm) can now be achieved with fluidized bed jet mills. As opposed to conventional dry grinding processes with fluidized bed jet mills, the s-Jet® System uses superheated steam as its milling gas.

CGS 10 and CGS 16 Fluidized Bed Jet Mills

The smallest jet mills for virtually contamination-free fine grinding with an integrated classifier wheel – highest finenesses also achievable with the hardest of products.

For finenesses from 2.5 to 70 µm (d97).

Machine sizes with grinding air capacities of approximately 35 to 125 Nm³/h.

s-Jet® 25 Laboratory-Scale-Steam Jet Mill

The s-Jet® System (patent pending) is a new innovation in a line of consistent developments being made in the area of air jet milling. Final finenesses in the submicron range (example: d50 0.2 µm) can now be achieved with fluidized bed jet mills. As opposed to conventional dry grinding processes with fluidized bed jet mills, the s-Jet® System uses superheated steam as its milling gas.

ConJet® 10 and ConJet® 16 High-Density Bed Jet Mills

A new interpretation of the spiral jet mill – with grinding finenesses adjusted by an integrated air classifier – for even steeper particle size distributions.

For finenesses from 2.5 to 70 µm (d97).

Machine sizes with grinding air capacities of approximately 35 to 125 Nm³/h.

CFS 5 and CFS 8 Fine Classifiers

Efficient separation of grain sizes and effective results for both coarse material and fine material separation.

For separation limits from 10 to 250 µm (d97).

Machine sizes with gas volume of approximately 25 to 145 Nm³/h.

CFS 5 HD-S and CFS 8 HD-S High-efficiency Fine Classifiers

The smallest for the finest – exact separation results for superfine powder through best possible product classification with the sharpest separation and maximum gains.

For separation limits from 2.5 to 60 µm (d97).

Machine sizes with gas volume of approximately 25 to 145 Nm³/h.

LabPilotPlant

Truly a flexible laboratory system – with reproducible results – variable for ultra-fine grinding and classifying – for laboratory operations or the continuous production of small batches!

LabCompactPlant

The LabCompactPlant was designed especially for the production of laboratory and small batches. Naturally, the daily demands of laboratory operations were taken into consideration when the details of the plant construction were being planned.


NETZSCH-Beads®

Products & Solutions in the field of NETZSCH-Beads®
ZetaBeads®

Yttrium-stabilized zirconium oxide grinding beads (Standard quality)

ZetaBeads® Plus

Yttrium-stabilized zirconium oxide grinding beads (High-end quality)

ZetaBeads® Nano

Yttrium-stabilized zirconium oxide grinding beads (High-end quality) for nano applications

CeraBeads

Cerium-stabilized zirconium oxide grinding beads (Standard quality)

ZsBeads

Zirconium silicate grinding beads