Laboratory Machines for Pharma & Cosmetics

Wet and dry preparation, mixing, dispersing, kneading and de-aeration, as well as classifying is difficult to perfect without laboratory machines. They are used for development of new products, for processing smallest quantities of a high-tech product, for quality control, quality assurance and process optimization. The reproducibility of the results that are achieved is an essential point. The ease of operation and the high degree of flexibility is a plus. Additionally a low cleaning expenditure at the highest possible product recovery can be guaranteed.


Wet Mills

From machines for grinding of the smallest product quantities to production of small batches you will find the right model for your needs.

Laboratory Mixer KappaVita Type HM

Scaleable Laboratory Mixers KappaVita type HM.

NETZSCH Omega®Lab

Successful dispersion requires targeted force in order to separate agglomerated particles. The Omega® Economic Disperser applies dispersive forces then and there, where they are especially effective: in the Omega® disperser body, energy is transformed into very high speeds under pressure.

Laboratory agitator bead mill LabStar

The multi-functional laboratory mill LabStar enables scientific academic work even at difficult research and development tasks and convinces by easy handling. The laboratory mill LabStar is the smallest grinding unit of NETZSCH-Feinmahltechnik GmbH that enables an exact scale-up to comparable production machines.

MiniSeries - Laboratory Mills for Product Development and Production of Smallest Batches

The compact, universally applicable laboratory circulation mills of the MiniSeries impress with their easy handling when processing very small quantities from 0.25 to 0.5 l up to particle sizes in the nanometer range. It is possible to conduct many tests with low loss of product and significant results within a short period of time.

NETZSCH DeltaVita® 15-300

The comminution or desagglomeration of active pharmaceutical ingredients (API) is called micronization and brings about several advantages. The increase of the particle surface caused by the comminution results in a considerably better dissolution rate and bioavailability of the agents and therefore the APIs act faster.

NETZSCH Omega® 60

Successful dispersion requires targeted force in order to separate agglomerated particles. The Omega® Economic Disperser applies dispersive forces then and there, where they are especially effective: in the Omega® disperser body, energy is transformed into very high speeds under pressure.

Laboratory batch mills PE 075 / PR 01 and PE 5 / PR 1 S

The periodically working agitator bead mills PE 075 / PR 01 and PE 5 / PR 1 S are the most improved and simpliest grinding units of NETZSCH-Feinmahltechnik GmbH. These laboratory machines work with both – the well-known MoliNex- and attritor system.


Dry Mills

For fine grinding of dry products of all industrial sectors, we have the right laboratory mill for each required target fineness, both with or without integrated classifier.

Impact Mill Condux® 60

The universal laboratory mill – flexible, easy to operate! For a high variety of products and finenesses.

For finenesses from 30 to 800 µm (d97).

Machine size with grinding air capacity of approximately 70 to 280 Nm³/h.

CGS 10 and CGS 16 Fluidized Bed Jet Mills

The smallest jet mills for virtually contamination-free fine grinding with an integrated classifier wheel – highest finenesses also achievable with the hardest of products.

For finenesses from 2.5 to 70 µm (d97).

Machine sizes with grinding air capacities of approximately 35 to 125 Nm³/h.

ConJet® 10 and ConJet® 16 High-Density Bed Jet Mills

A new interpretation of the spiral jet mill – with grinding finenesses adjusted by an integrated air classifier – for even steeper particle size distributions.

For finenesses from 2.5 to 70 µm (d97).

Machine sizes with grinding air capacities of approximately 35 to 125 Nm³/h.


Mixer

With our laboratory mixing, kneading and dispersing machines we offer the optimal solution for pre-dispersing, suspending or homogenization of low or high viscosity products.

ShearMaster Laboratory Dissolver

The ShearMaster laboratory dissolver is designed for batch sizes of 1 to 10 l and is equipped with a 1.1 kW variable speed drive.

Micro Ψ-Mix® Laboratory Inline Disperser

With the laboratory-scale version of the successful Ψ-Mix® Inline Disperser you can rely on innovative dispersion technology with emission-free inline operation for optimal wetting of powders in liquids.


Laboratory De-Aerator

Removal of micronized gas and air pockets from flowable products in a wide range of viscosities.

Laboratory De-Aerator MiniVac

The MiniVac laboratory-scale De-Aerator was specially developed for small batches or initial tests and – like the production-scale NETZSCH vacuum de-aerator – operates according to the VTR principle (vacuum - thin film - rotary process). With extreme ease of operation you can remove micronized pockets of gas and air from free-flowing products of various viscosities as well as from viscous pastes and compounds.