Cyclones

Centrifugal Separator with Extremely High Degree of Separation

General

General

Cyclone or centrifugal separators are used in grinding- and classifying plants for separating the product out of the gas flow. The gas loaded with product enters the cyclone tangentially via the inlet spiral and is then set in a rotating motion. In the vortex the coarse particles are transported outwards by centrifugal force and then separated out through the product outlet. Small particles leave the cyclone at the gas outlet with the gas flow after a vortex reversion (secondary vortex) upwards through the immersion tube. With a NETZSCH cyclone you can achieve a degree of separation of up to 99.9%* depending on the product and fineness.

* Example: Product density = 7.87 g/cm3, fineness d97 = 11.2 µm

Executions with NETZSCH Cyclones

  • With spiral hood for vortex-free gas outlet and conditioning hopper which prevents entrainment of the separated product in the secondary vortex
  • Separation flange, can be optionally equipped with swivel device with manual winch or in hydraulic variants for simplifying demounting and cleaning
  • Pressure shock resistant execution up to 10 bar(g) possible
  • Materials normal- (1.0037) or stainless steel (1.4301, 1.4404, 1.4541, 1.4571)
  • Surfaces and coatings:
    • Ground
    • Polished
    • PU, Teflon or ceramic coatings
    • Further executions upon request

Use of Cyclones

  • For use when frequent product change is required, for example in laboratory area
  • In plants which are run with many different milling settings
  • In plants which must be cleaned frequently (product characteristics, product change)
  • To avoid contamination of the product with filter material (fibers)

Focus on Your Advantages

  • Proven and tested construction for problem-free long-term operation
  • High efficiency and reliable separation of dry particles with high degree of separation
  • Low operating costs
Literatura

Literatura

Catálogo

Catálogo

Efficient Separation of Dust with Problem-Free Operation

Catálogo

NETZSCH Trockenmahltechnik GmbH, one of the global leading companies in the area of dry product processing, is part of the Business Unit Grinding & Dispersing of the NETZSCH Group. Customers profit from our comprehensive experience potential and our diverse machine program, ranging from laboratory- and production machines to complete production lines. Fine impact mills, classifying- and jet mills as well as fine-cutting mills and high-efficiency fine classifiers made by NETZSCH are mainly used in the application areas chemistry, inorganic materials/minerals, ceramics and life science for pharma- and food applications.

Su petición

Su petición

Si quiere solicitar más información, por favor contacte con nuestro Dpto. Comercial , haciendo click en el botón.

También podría estar interesado en:

NETZSCH SmartRemoval

NETZSCH SmartRemoval is an innovative filter hose replacement system saving time and money. It combines the advantages of the conventional Top and Side Removal Systems and offsets their weak points.

Top Removal Hose Filter

In Top Removal dust filters the filter hoses and -baskets are removed from the top via the clean gas side.

Rapid Change Filter

Rapid change filters are particularly suitable for production during which the product or color are changed frequently, as the complete filter packet must then be exchanged.

ATEX-Filter

Safe Use also in Explosion-Hazardous Areas