NETZSCH SmartRemoval

The economical and innovative system for easy filter hose change

General

This new type of filter hose changing system combines the advantages of conventional Top- und Side Removal Systems in one product.

In the past the choice made by companies purchasing dust filter systems was in general limited by the type of plant they already had: Basically, if the height of the building made filter change possible a Top Removal System was chosen, as such systems always have a lower residual dust content compared to Side Removal Systems. However, if the building was too low, then a Side Removal System was always chosen, although these always meant longer stoppages for changing filter hoses and cleaning. This was seen as the lesser evil compared to the high costs required for modification work to the production facilities.

This dilemma inspired the design engineers at NETZSCH Trockenmahltechnik GmbH to look at the problem of filter hose changing from the customer´s point of view. The resulting worldwide innovationis a new type of filter hose changing system that combines the advantages of conventional Top- und Side Removal Systems in one product.

No tools, quick and easy

The main conceptual emphasis during the development of the SmartRemoval was first and foremost on enabling an intuitive filter hose change without tools, which could be carried out easily and rapidly. In practice stoppages necessary for changing the filter hoses constitute a major cost factor, which can even be decisive for the profitability of individual campaigns with frequent product change.

A further focus was on reducing the residual dust content down to that of a Top Removal System. In the end, the designers of the SmartRemoval were able to solve both tasks. The well thought out installation technology is constructed in such a way to exclude mounting errors and the mounting of the SmartRemoval is up to 80% quicker than that of previous Side Removal systems. In addition to this its residual dust content is so low that it is comparable to that of conventional Top Removal systems.

  • Mounting time up to 80 % shorter compared to side removal systems.
  • Easy mounting from the raw gas side without additional tools.
  • Proven Snap Ring technology guarantees the dust-tightness of the clean gas chamber.
  • The same residual dust contents as with top removal snap ring systems.
  • Mounting errors cannot occur.
  • No additional space in the building needed for dismounting the support cages as required for top removal systems.
  • Existing systems can be modified and retrofitted

Videos

NETZSCH SmartRemoval

Literatura

Catálogo

Catálogo

The patent-pending NETZSCH SmartRemoval is an innovative filter hose replacement system saving time and money. It combines the advantages of the conventional Top and Side Removal Systems and offsets their weak points.

Catálogo

Efficient Separation of Dust with Problem-Free Operation

Su petición

Si quiere solicitar más información, por favor contacte con nuestro Dpto. Comercial , haciendo click en el botón.

También podría estar interesado en:

Molino Jet de lecho fluidizado CGS

La combinación de un molino jet y un clasificador dinámico por aire, da como resultado una perfecta molienda en vía seca. Es posible alcanzar y reproducir la finura final deseada dentro de unos límites exactos de tamaño de partícula. El desarrollo de los nuevos e-Jet® y s-Jet®, está abriendo nuevos campos de aplicación, hasta ahora vedados a la molienda por chorro de aire, por razones económicas o técnicas. Es aplicable para finuras desde 1 a 70 µm (d97).

Tamaños de máquinas disponibles para volúmenes de aire de molienda desde aprox. 50 a 12.000 Nm³/h.

SpheRho® Dry Agitator Bead Mill

NETZSCH is expanding its product portfolio with an agitator bead mill for the dry grinding of mineral and ceramic raw materials. The SpheRho® impresses with very high product fineness and high throughput rates with low specific energy consumption.

LabPilotPlant

Truly a flexible laboratory system – with reproducible results – variable for ultra-fine grinding and classifying – for laboratory operations or the continuous production of small batches!

Clasificador fino de alta eficiencia CFS/HD-S

Algunos productos exigen para su correcta aplicación que el punto de corte sea realmente fino y que haya una separación nítida de tamaños. Estos requerimientos no suponen ningún problema para nuestros clasificadores finos de alta eficiencia tipo CFS/HD-S.

El producto a clasificar se predispersa al máximo para poder optimizar claramente el punto y la agudeza del corte objetivo.

Disponible para finuras desde 2,5 a 60 µm (d97).

Tamaños de máquinas disponibles para un volumen de gas de aprox. 50 a 16.000 Nm³/h.