Inline Disperser

For the best possible wetting and dispersion of the powdered solids in liquid, the pressure differences created by the pumping and centrifugal action of the rotor are utilized.

Air contained in the powder expands in the negative pressure of the suction area and the powder enters the liquid, which is pressed into the core of the powder structure in the positive pressure area of the rotor.

Powders wetted in this way can be finely dispersed with considerably less energy input. As a result, products that do not require further grinding can be manufactured with permanently reproducible quality.

Products that require further homogenization in a rotor/stator or further grinding in an agitator bead mill can be processed with optimized parameters, such as higher throughput or smaller grinding media. Here, the consistent quality of the predispersion has a positive effect on the reproducibility of the grinding result.

That is why the EpsilonVita can be combined with the GammaVita, KappaVita and LambdaVita model series as System Vita.



Dispersion Quality

  • Permanently reproducible product quality
  • Best wetting of the solid surface
  • Gentle processing of sensitive formulation components

Handling & Cleaning

  • Process free of manual influences
  • Quick and easy to clean, good accessibility
  • No adhesion of powder dust in the process tank

Dust & Emission Free

  • Closed process housing
  • Separate intake of solids and liquids
  • Loss-free introduction of solids

Process Safety

  • Automatic operation eliminates operator error
  • Explosionproof design

Application Examples

Toothpaste, concealer and sunscreen

Pharmaceutical Applications

Pre-dispersion of products for homogenization

  • Increase in production output through rapid introduction of powder and optimal dispersion of the solid in the liquid
  • Can be combined with the KappaVita homogenizing mixer
  • Dispersion of active ingredient in liquid
  • Problem-free compliance with the temperature limits
  • Deaeration of the product, example: cough syrup
  • Use as a pre-disperser for intermediate product 
  • For example for dispersing xanthan, gum or CMC



You may also be interested in:

Laboratory Mixer KappaVita Type HM

Scaleable Laboratory Mixers KappaVita type HM.

Premix Vessels GammaVita

The premix vessel GammaVita Type ABF designed for a fat phase and is mostly equipped with a two-zone heating and an additional grinding head.
The premix vessel GammaVita Type ABW is designed for water phases.

Homogenizing Mixer KappaVita

Homogenizing Mixer KappaVita in pressure- and vacuum-proof machine design

Laboratory Mixer KappaVita Type HM

Scaleable Laboratory Mixers KappaVita type HM.