Micro Ψ-Mix® Laboratory Inline Disperser

Innovative Dispersion Technology – simultaneous Dispersion and De-aeration

General

The Micro Ψ-Mix® is the laboratory-scale version of the proven Ψ-Mix® Inline Disperser designed for pilot plants and small batches. Homogeneous, fine dispersions with exactly reproducible quality are achieved within a controlled process in the Micro Ψ-Mix®. It combines a new energy-saving dispersing method with emission-free inline operation. Powdered solids are wetted with liquid components under vacuum and micro-cavitation. 
It is possible to process both low and high viscosity suspensions – even those that can barely be pumped – from the entire range of applications for dispersing technology.

The Micro Ψ-Mix® shows its true strength when processing products

  • with a high solids content
  • with a low solids content in large liquid batches
  • with solids that are difficult to wet
  • with extremely fine solids

Datos Técnicos

  • The machine runs in an enclosed system in batch operation, with solids and liquids combined inline
  • Dry-run protection
  • Automatic operation via PLC and frequency inverter
  • Swivel device separates wet and dry areas for the fastest possible maintenance times
  • Smooth surfaces, all peripheral components are housed in the base of the machine
  • Customization of the dosing speed via vacuum reduction and power adjustment
  • De-aeration in the thin film process
  • Low sensitivity to foreign substances
  • Mechanical seal with safety functions
  • Cooled processing zone
  • Dry area protected from flooding
  • Error messages displayed on the control panel
Micro Psi-MIX Laboratory Inline Disperser - combination of a new energy-saving dispersing method and emission-free inline operation

Aplicaciones

Videos

NETZSCH Inline Disperser Ψ-Mix® dispersion process
NETZSCH Ψ-Mix®

Literatura

Catálogo

Catálogo

With the NETZSCH Ψ-Mix® Inline-Disperser you achieve optimal wetting of dusty solids in liquid components.

Catálogo

NETZSCH-Feinmahltechnik GmbH offers mixing, kneading and dispersing machines for low- to high-viscosity products as well as a variety of wet-grinding units for reduction into the nanometer range, tailor-made for each application. When it comes to the processing of dry products by cutting, fine grinding or fine classification, you will find a wealth of experience and an equally varied program of fine-impact mills, classifier and jet mills as well as fine-cutting mills and high-performance fine classifiers.

Bibliografía técnica

Bibliografía técnica

For as long as man has attempted to mix solids with liquids, he has struggled to avoid an annoying, if not wholly unacceptable, byproduct – lumps, or more scientifically, agglomerates. In the case of a single serving of a food product, as in your morning coffee when you add powdered creamer, these agglomerates may be merely objectionable.

Su petición

Si quiere solicitar más información, por favor contacte con nuestro Dpto. Comercial , haciendo click en el botón.

También podría estar interesado en:

Dispersor en línea Ψ-Mix®

El dispersor en línea Ψ-Mix® es un sistema revolucionario para la mezcla y dispersión de sólidos en líquidos. Se logran dispersiones finas, homogéneas y de exacta calidad reproducible, todo ello con un proceso controlado y libre de emisiones

NETZSCH Omega®

Successful dispersion requires targeted force in order to separate agglomerated particles. The Omega® Economic Disperser applies dispersive forces then and there, where they are especially effective: in the Omega® disperser body, energy is transformed into very high speeds under pressure.

Molino de recirculación sistema Zeta® Tipo LMZ

Sistema de molienda en recirculación para un sinfín de aplicaciones. Adecuado para un amplísimo rango de viscosidades y productos, utiliza microesferas desde 90 µm a 3 mm. Proporciona altas calidades de producto, pudiendo alcanzar incluso finuras hasta el rango nanométrico.

NETZSCH Alpha®. La próxima generación de molinos agitadores de microesfeas

NETZSCH-Feinmahltechnik GmbH has now developed the new Alpha® modular machine platform. Compared to earlier-generation machines, this series is designed such that different grinding systems can be mounted on the same base platform as appropriate for a defined drive capacity.