SecoMy® S Fine Cutting Mill

The finest cut!

General

Fine Cutting Mills of the type SecoMy® S are high speed cutting mills with high-frequency cutting strokes for the fine-grinding of cuttable materials. In contrast to classic cutting mills, final finenesses of up to 45 μm can be reached in a one-step process with the SecoMy® S. This is possible due to an air classifier integrated into the machine housing, which replaces the traditionally-used screen mesh. A dynamic classifier wheel classifies the ground product within the mill and forms the product discharge for the fine fraction.

Your advantage is our focus

  • Lower energy costs
  • Highest flexibility
  • Best product quality
  • High yield
  • Low product temperatures
  • Highest availability
  • High bulk densities
  • Narrow particle size spectrum
  • Possibility of blending
  • Increase in productivity
  • One-step ultrafine grinding

Datos Técnicos

Constructional Characteristics of the SecoMy® S

  • Screenless fine-cutting mill
  • Thermally optimized system
  • Optimized variable knife concept
  • Coolable by air and water
  • Adjustable grinding air flow
  • Small amount of wear parts required
  • Rotary knives adjustable from outside the machine
  • Very simple knife change
  • Compressed air-rinsed bearing sealings to prevent product entering into the bearings
  • Gap rinsing for classifier wheel to avoid oversized particles
  • Wear protection possible
  • Optional pressure shock resistant execution
  • Optional gastight execution
High-Performance Fine Cutting! Fine Cutting Mill SecoMy S

Aplicaciones

  • Textiles
  • Mineral fibers
  • Plastic fibers
  • Carbon fibers
  • Paper
  • Plastics
  • Wood
Pulverization of cellulose with highest bulk density

Videos

NETZSCH Fine cutting mill SecoMy®® S

Literatura

Catálogo

Catálogo

NETZSCH-Feinmahltechnik GmbH offers mixing, kneading and dispersing machines for low- to high-viscosity products as well as a variety of wet-grinding units for reduction into the nanometer range, tailor-made for each application. When it comes to the processing of dry products by cutting, fine grinding or fine classification, you will find a wealth of experience and an equally varied program of fine-impact mills, classifier and jet mills as well as fine-cutting mills and high-performance fine classifiers.

Catálogo

The NETZSCH range of Fine-Grinding Mills type SecoMy® S consists of rapidly running cutting mills with a high rate of cuts which can be used for the ultrafine grinding of cuttable materials. In contrast to classic cutting mills, final finenesses of up to 45 μm can be reached in a one-step process with the SecoMy® S.

Su petición

Si quiere solicitar más información, por favor contacte con nuestro Dpto. Comercial , haciendo click en el botón.

También podría estar interesado en:

SecoMy® Fine Cutting Mill

The fast operating fine cutting mills SecoMy® are the choice for the pulverization of fibrous, ductile, soft, viscoplastic or temperature-sensitive products. This type of cutting mill distinguishes itself through the optimization of number and position of the knives and the high cutting stroke rate.

Machine sizes available with drive capacities from 37 to 200 kW.

Molino de corte fino CS-Z

Estos molinos de corte fino y de rápida operación, se utilizan principalmente para la pulverización de productos fibrosos, blandos o elásticos. La característica más relevante de este molino de corte es la optima posición de las cuchillas y el número de las mismas, así como la elevada frecuencia de corte.

Para finuras desde 0,1 a 3 mm (d97).

Máquinas desde 15 a 90 kW.

Molino de impacto Condux®

El molino fino de impacto o molino centrífugo normalmente trabaja con las siguientes configuraciones: molino de disco con pins, de palas, de alas batidoras o molino con disco ranurado. Con el molino Universal se pueden procesar un amplio rango de productos y finuras, combinando y cambiando fácilmente distintos rotor y estátors. Se usa para finuras desde 30 a 800 µm (d97).

Tamaños de máquina desde 1,1 - 250 kW y volúmenes de aire de aprox. 140 - 31.000 Nm³/h.

NETZSCH SmartRemoval

NETZSCH SmartRemoval is an innovative filter hose replacement system saving time and money. It combines the advantages of the conventional Top and Side Removal Systems and offsets their weak points.