NETZSCH SmartLock

Rapid Locking System for Filter and Cyclones

Ogólne informacje

Ogólne informacje

The NETZSCH newly developed rapid locking system reduces maintenance times required for opening and closing of the flange connection between raw- and clean gas chamber to a minimum.

For a filter plant with a filter area of e.g. 75 m2, the loosening of 40 clamp screws takes around 35 minutes. After cleaning, these clamps must be carefully tightened again to prevent penetration of dust into and around the clean gas chamber. NETZSCH SmartLock shortens the opening- and closing time for each flange connection to less than 2 min. Thanks to the easy handling, operating errors are practically eliminated and at the same time standstill times for maintenance- and cleaning work are reduced significantly.

When pressure is applied to the sealing, the flange connection is pressed against the clamping bracket, the filter is sealed outwards and the area between raw- and clean gas chamber separated. Thanks to the possibility of setting various charging pressure values of the sealing, the system can be used in vacuum areas from 0.65 bar(abs) as well as up to 11 bar(abs) overpressure.

NETZSCH SmartLock is used for the following applications:

  • Round filter
  • Rectangular filter
  • Separation flanges of cyclones
  • Also for pressure shock resistant executions
NETZSCH SmartLock
NETZSCH SmartLock
NETZSCH SmartLock
Literatura

Literatura

Broszura

Broszura

Efficient Separation of Dust with Problem-Free Operation

Wasze zapytanie

Wasze zapytanie

Proszę kliknąć na link aby skontaktować się z naszym sprzedawcą po więcej informacji Informacja.

Być może jesteś zainteresowany:

NETZSCH SmartRemoval

NETZSCH SmartRemoval is an innovative filter hose replacement system saving time and money. It combines the advantages of the conventional Top and Side Removal Systems and offsets their weak points.

Top Removal Hose Filter

In Top Removal dust filters the filter hoses and -baskets are removed from the top via the clean gas side.

Cyclones

Cyclone or centrifugal separators are used in grinding- and classifying plants for separating the product out of the gas flow.