LabPilotPlant

Diverse System!

Ogólne informacje

Are you looking for a contamination-free jet mill for your Laboratory that can also fine classify some products? Or do you also need an additional classifier mill for certain applications? Surely two or three plant installations are not an efficient solution – the space requirement alone ….

For smaller batches and lower investment costs, a LabPilotPlant is the solution! These single installations can quickly be adapted to practically any machine module. Depending on the amount of gas needed for operation, this can include any of the following mills:

  • Fluidized Bed Jet Mill CGS,
  • High Density Bed Jet Mill ConJet®,
  • Ultra-Fine Classifier CFS,
  • High-efficiency Fine Classifier CFS/HD-S
  • and even the Classifier Mill CSM.

Truly a flexible laboratory system – with reproducible results – variable for ultra-fine grinding and classifying – for laboratory operations or the continuous production of small batches!

NETZSCH SmartRemoval

The filter of the LabPilotPlant is equipped with the SmartRemoval (patent-pending) filter hose exchange system newly developed by NETZSCH.

With this system, the same low residual dust content as that obtained with Top Removal filters can be achieved without their disadvantage, i.e. no additional installation height is required with SmartRemoval. NETZSCH SmartRemoval requires the same amount of space as standard Side Removal systems. With this system, no tools are required for exchanging the filter hoses and their mounting is significantly quicker and very easy. For you this means that filter hose exchange times are reduced by up to 80 %!

Technika

  • Finenesses up to d97 2.5 µm (based on limestone)
  • Selection of a diversity of machine modules (laboratory classifiers or laboratory mills)
  • All machine housings are hinged
  • All machines equipped with classifier wheel with simultaneously rotating immersion tube for highest finenesses
  • Gap between classifier wheel and fines outlet rinsed by gas for highest possible prevention of oversize particles
  • Classifier shaft seal rinsed by compressed gas to protect the bearings
  • Unlimited adjustment of the final fineness
  • Even load on the classifier wheel through rotationally symmetrical construction of the machines
  • Very easy access for fast, easy cleaning and maintenance
  • Reproducible results
  • Noiseless operation
  • Plants delivered ready for operation
  • Can be purchased with multiple modules – or they can be added at a later time
  • Optional designs available: pressure shock resistant, gas tight, wear protected

Zastosowanie

Celuloza / Masa włóknista

 

Kleje / Szczeliwa

 

Agrochemia

 

Ceramika / Szkło

Literatura

Broszura

Broszura

NETZSCH-Feinmahltechnik GmbH posiada w ofercie mieszalniki, ugniatarki i disolwery do produktów od niskiej do wysokiej lepkości, jak również duży wybór urządzeń do mielenia na mokro do zakresu nanometra, które są oddzielnie wytwarzane do konkretnego zastosowania. W zakresie przetwarzania suchych produktów poprzez cięcie, mielenie drobnoziarniste lub klasyfi kację drobnoziarnistą, oddajemy do Państwa dyspozycji nasze bogate doświadczenie i równie zróżnicowaną ofertę drobno mielących młynów udarowych, młynów z separatorem, młynów strumieniowych oraz młynów drobno tnących i wysokowydajnych klasyfi katorów do produktów drobnoziarnistych.

Broszura

Ultra-fine Grinding and Ultra-fine Classifying on a Laboratory Scale

Wasze zapytanie

Proszę kliknąć na link aby skontaktować się z naszym sprzedawcą po więcej informacji Informacja.

Być może jesteś zainteresowany:

Impact Mill Condux® 60

The universal laboratory mill – flexible, easy to operate! For a high variety of products and finenesses.

For finenesses from 30 to 800 µm (d97).

Machine size with grinding air capacity of approximately 70 to 280 Nm³/h.

LabCompactPlus

The LabCompactPlus was especially designed for use in laboratories - machine (mills or classifiers) are taken up by a swivel arm on the machine base and can be exchanged very easily.

PilotPlant

The basic module of the PilotPlant can be operated with different mills and classifiers - predestined for the production of small quantities.

s-Jet® 25 Laboratory-Scale-Steam Jet Mill

System s-Jet® (patent zgłoszony) jest nowym osiągnięciem na drodze konsekwentnego rozwoju technologii mielenia strumieniowo-fluidyzacyjnego. Przy pomocy młynów strumieniowo-fluidyzacyjnych można obecnie uzyskać rozdrobnienie końcowe w zakresie submikronowym (na przykład d50 0,2 µm). Odmiennie od konwencjonalnego procesu mielenia na sucho w młynie strumieniowo-fluidyzacyjnym system s-Jet® wykorzystuje przegrzaną parę jako gaz do mielenia.