NETZSCH LabCompactPlus

The Module Plant

Ogólne informacje

The LabCompactPlus was especially designed for use in laboratories. The technology of production-size plants which has been channeled into the design of this product guarantees a stable and reproducible processing method.

Naturally the daily conditions of laboratory operation were taken into consideration during the plant construction. As well as the actual machine, the plant comprises a very compact operating module including feeding, cyclone, filter, blower and electrical control unit which enables our customers to install this plant in a very small room.

The complete plant is mounted on one single base frame and is delivered completely installed. This means that commissioning can be carried out straight after delivery in the customer´s lab!

Technika

The NETZSCH LabCompactPlus is available with the following machines, which can be easily exchanged:

  • Fluidized Bed Jet Mill CGS 10
  • High-Density Bed Mill ConJet® 10
  • Classifier Mill CSM 50
  • Ultra-Fine Classifier CFS 5
  • High-Efficiency Classifier CFS 5 HD-S

Each machine is taken up by a swivel arm on the machine base and can be exchanged very easily using an individual connecting kit for each machine type.

  • Quick and easy cleaning
  • Optimum accessibility
  • Efficient product separation
  • Dust-free filling
  • Compact installation, optimized machine base
  • Low feed height
  • Maximum individual weight of each component for cleaning and maintenance is < 5 kg
  • Simple clear operation
  • Setting of all process parameters via integrated operator panel
  • Machine can easily be exchanged thanks to individual connecting set for each machine type (electricity and compressed air)
  • CompactPlus Cart for easy exchange of machines (optional)

Zastosowanie

Kleje / Szczeliwa

 

Celuloza / Masa włóknista

 

Ceramika / Szkło

 

Agrochemia

Literatura

Broszura

Broszura

Ultra-fine Grinding and Ultra-fine Classifying on a Laboratory Scale

Wasze zapytanie

Proszę kliknąć na link aby skontaktować się z naszym sprzedawcą po więcej informacji Informacja.

Być może jesteś zainteresowany:

LabPilotPlant

Truly a flexible laboratory system – with reproducible results – variable for ultra-fine grinding and classifying – for laboratory operations or the continuous production of small batches!

Impact Mill Condux® 60

The universal laboratory mill – flexible, easy to operate! For a high variety of products and finenesses.

For finenesses from 30 to 800 µm (d97).

Machine size with grinding air capacity of approximately 70 to 280 Nm³/h.

s-Jet® 25 Laboratory-Scale-Steam Jet Mill

System s-Jet® (patent zgłoszony) jest nowym osiągnięciem na drodze konsekwentnego rozwoju technologii mielenia strumieniowo-fluidyzacyjnego. Przy pomocy młynów strumieniowo-fluidyzacyjnych można obecnie uzyskać rozdrobnienie końcowe w zakresie submikronowym (na przykład d50 0,2 µm). Odmiennie od konwencjonalnego procesu mielenia na sucho w młynie strumieniowo-fluidyzacyjnym system s-Jet® wykorzystuje przegrzaną parę jako gaz do mielenia.

PilotPlant

The basic module of the PilotPlant can be operated with different mills and classifiers - predestined for the production of small quantities.