Fine Cutting Mills of the type SecoMy® S are high speed cutting mills with high-frequency cutting strokes for the fine-grinding of cuttable materials. In contrast to classic cutting mills, final finenesses of up to 45 μm can be reached in a one-step process with the SecoMy® S. This is possible due to an air classifier integrated into the machine housing, which replaces the traditionally-used screen mesh. A dynamic classifier wheel classifies the ground product within the mill and forms the product discharge for the fine fraction.
Your advantage is our focus
- Lower energy costs
- Highest flexibility
- Best product quality
- High yield
- Low product temperatures
- Highest availability
- High bulk densities
- Narrow particle size spectrum
- Possibility of blending
- Increase in productivity
- One-step ultrafine grinding
Constructional Characteristics of the SecoMy® S
- Screenless fine-cutting mill
- Thermally optimized system
- Optimized variable knife concept
- Coolable by air and water
- Adjustable grinding air flow
- Small amount of wear parts required
- Rotary knives adjustable from outside the machine
- Very simple knife change
- Compressed air-rinsed bearing sealings to prevent product entering into the bearings
- Gap rinsing for classifier wheel to avoid oversized particles
- Wear protection possible
- Optional pressure shock resistant execution
- Optional gastight execution
Broszura
The NETZSCH range of Fine-Grinding Mills type SecoMy® S consists of rapidly running cutting mills with a high rate of cuts which can be used for the ultrafine grinding of cuttable materials. In contrast to classic cutting mills, final finenesses of up to 45 μm can be reached in a one-step process with the SecoMy® S.