Maszyny laboratoryjne

Trudno jest udoskonalić technologię przerobu na mokro i na sucho, mieszania, dyspersji, ugniatania i odgazowywania oraz klasyfikacji bez maszyn laboratoryjnych. Są one używane do prac badawczo-rozwojowych nad nowymi produktami, do przetwarzania małych ilości zaawansowanych technicznie produktów, do kontroli i zapewnienia jakości oraz optymalizacji procesu. Istotną cechą jest powtarzalność osiąganych wyników. Dodatkowym atutem jest łatwość obsługi i wysoki poziom elastyczności. Zapewnione są też niskie koszty czyszczenia i najwyższy możliwy stopień odzysku produktu.

Młyny do mielenia na mokro

Znajdziecie tu Państwo odpowiedni model dostosowany do Państwa potrzeb: od mielenia najmniejszych ilości produktu do wytwarzania krótkich partii.

Laboratory Agitator Bead Mill Alpha® Lab

The LabStar laboratory-scale agitator bead mill is one of the most successful machines in the history of NETZSCH-Feinmahltechnik GmbH. With the new Alpha® Lab laboratory agitator bead mill, the concept of the new generation of agitator bead mills, presented for the first time in 2015 with the Alpha®® 22 and the Alpha®® 45, has been consistently transferred to the laboratory mill.

Laboratory agitator bead mill LabStar

The multi-functional laboratory mill LabStar enables scientific academic work even at difficult research and development tasks and convinces by easy handling. The laboratory mill LabStar is the smallest grinding unit of NETZSCH-Feinmahltechnik GmbH that enables an exact scale-up to comparable production machines.

Laboratory agitator bead mill MiniZeta

The universally applicable laboratory circulation mill MiniZeta is essential for research and development. Its easy operation, equipped with easy to clean tools of stainless steel, achieves the machine excellent results down to the Sub-Micron range.

MiniSeries - Laboratory Mills for Product Development and Production of Smallest Batches

The compact, universally applicable laboratory circulation mills of the MiniSeries impress with their easy handling when processing very small quantities from 0.25 to 0.5 l up to particle sizes in the nanometer range. It is possible to conduct many tests with low loss of product and significant results within a short period of time.

NETZSCH DeltaVita® 15-300

The comminution or desagglomeration of active pharmaceutical ingredients (API) is called micronization and brings about several advantages. The increase of the particle surface caused by the comminution results in a considerably better dissolution rate and bioavailability of the agents and therefore the APIs act faster.

NETZSCH DeltaVita® 600

The comminution or desagglomeration of active pharmaceutical ingredients (API) is called micronization and brings about several advantages. The increase of the particle surface caused by the comminution results in a considerably better dissolution rate and bioavailability of the agents and therefore the APIs act faster.

NETZSCH Omega® 60

Successful dispersion requires targeted force in order to separate agglomerated particles. The Omega® Economic Disperser applies dispersive forces then and there, where they are especially effective: in the Omega® disperser body, energy is transformed into very high speeds under pressure.


Młyny do mielenia na sucho

Mamy odpowiedni młyn laboratoryjny do każdego rozdrobnienia końcowego suchego produktu z dowolnego sektora przemysłu, ze zintegrowanym separatorem lub bez separatora.

Impact Mill Condux® 60

The universal laboratory mill – flexible, easy to operate! For a high variety of products and finenesses.

For finenesses from 30 to 800 µm (d97).

Machine size with grinding air capacity of approximately 70 to 280 Nm³/h.

CSM 50 and CSM 80 Classifier Mill

The mechanical impact mill with highly developed classifying technology – solid, robust, precise upper particle size limitation.

For finenesses from 10 to 150 µm (d97).

Machine size with grinding air capacity of approximately 100 to 180 Nm³/h.

CGS 10 and CGS 16 Fluidized Bed Jet Mills

The smallest jet mills for virtually contamination-free fine grinding with an integrated classifier wheel – highest finenesses also achievable with the hardest of products.

For finenesses from 2.5 to 70 µm (d97).

Machine sizes with grinding air capacities of approximately 35 to 125 Nm³/h.

ConJet® 10 and ConJet® 16 High-Density Bed Jet Mills

A new interpretation of the spiral jet mill – with grinding finenesses adjusted by an integrated air classifier – for even steeper particle size distributions.

For finenesses from 2.5 to 70 µm (d97).

Machine sizes with grinding air capacities of approximately 35 to 125 Nm³/h.

s-Jet® 25 Laboratory-Scale-Steam Jet Mill

System s-Jet® (patent zgłoszony) jest nowym osiągnięciem na drodze konsekwentnego rozwoju technologii mielenia strumieniowo-fluidyzacyjnego. Przy pomocy młynów strumieniowo-fluidyzacyjnych można obecnie uzyskać rozdrobnienie końcowe w zakresie submikronowym (na przykład d50 0,2 µm). Odmiennie od konwencjonalnego procesu mielenia na sucho w młynie strumieniowo-fluidyzacyjnym system s-Jet® wykorzystuje przegrzaną parę jako gaz do mielenia.

LabCompactPlus

The LabCompactPlus was especially designed for use in laboratories - machine (mills or classifiers) are taken up by a swivel arm on the machine base and can be exchanged very easily.

LabPilotPlant

Truly a flexible laboratory system – with reproducible results – variable for ultra-fine grinding and classifying – for laboratory operations or the continuous production of small batches!

PilotPlant

The basic module of the PilotPlant can be operated with different mills and classifiers - predestined for the production of small quantities.


Mieszalniki

Nasze laboratoryjne mieszalniki, gniotowniki i dyspergatory oferują optymalne rozwiązanie do celów wstępnej dyspersji, tworzenia zawiesin i homogenizacji produktów o niskiej lub wysokiej lepkości.

PMH 1 / PML 1 Laboratory Planetary Mixer

For challenging mixing tasks involving small quantities of high- and medium-viscosity products, our PMH 1 or PML 1 Laboratory Planetary Mixer is the machine for you. The compact table-top model provides for ease of operation and homogeneous mixing and de-aeration of your product.

ShearMaster Laboratory Dissolver

The ShearMaster laboratory dissolver is designed for batch sizes of 1 to 10 l and is equipped with a 1.1 kW variable speed drive.

Micro Ψ-Mix® Laboratory Inline Disperser

With the laboratory-scale version of the successful Ψ-Mix® Inline Disperser you can rely on innovative dispersion technology with emission-free inline operation for optimal wetting of powders in liquids.


Odgazowywacz laboratoryjny

Usuwanie zmikronizowanych pęcherzy gazu i powietrza z produktów płynnych w szerokim zakresie lepkości.

Laboratory De-Aerator MiniVac

The MiniVac laboratory-scale De-Aerator was specially developed for small batches or initial tests and – like the production-scale NETZSCH vacuum de-aerator – operates according to the VTR principle (vacuum - thin film - rotary process). With extreme ease of operation you can remove micronized pockets of gas and air from free-flowing products of various viscosities as well as from viscous pastes and compounds.


Klasyfikacja

W naszej ofercie mamy odpowiedni klasyfikator laboratoryjny do separacji nadziarna lub do tak zwanego odpylania wcześniej zmielonych proszków!

CFS 5 and CFS 8 Fine Classifiers

Efficient separation of grain sizes and effective results for both coarse material and fine material separation.

For separation limits from 10 to 250 µm (d97).

Machine sizes with gas volume of approximately 25 to 145 Nm³/h.

PilotPlant

The basic module of the PilotPlant can be operated with different mills and classifiers - predestined for the production of small quantities.

CFS 5 HD-S and CFS 8 HD-S High-efficiency Fine Classifiers

The smallest for the finest – exact separation results for superfine powder through best possible product classification with the sharpest separation and maximum gains.

For separation limits from 2.5 to 60 µm (d97).

Machine sizes with gas volume of approximately 25 to 145 Nm³/h.

LabCompactPlus

The LabCompactPlus was especially designed for use in laboratories - machine (mills or classifiers) are taken up by a swivel arm on the machine base and can be exchanged very easily.

LabPilotPlant

Truly a flexible laboratory system – with reproducible results – variable for ultra-fine grinding and classifying – for laboratory operations or the continuous production of small batches!