The Atlas is a roller air-swept mill designed for continuous operation with minimum maintenance. The fundamental difference between the Atlas and other table-roller mills is the bearing arrangement for the grinding table which is incorporated into the base of the mill. This enables an operation with a standard design gearbox instead of the typical gearboxes with integrated bearing section with long delivery times. The milling force is no longer transmitted to any foundation, but directly transferred to the roller arms making sure that civil work, erection and operation are easier to be handled and therefore much more inexpensive.
Fresh feed is introduced to the mill at a controlled rate through the upper feed chute. Milling takes place between the rollers and the table as the material moves outwards. The depth of the material bed on the grinding table is adjustable in order to control the retention time in the grinding zone. The ground material is entrained in the air stream which enters through tangential air ports in the base of the mill and is carried upwards to the classifier for the separation by particle size.
Product of the required particle size is carried through the classifier for collection in the downstream cyclone and/or filter whilst oversize material returns to the grinding zone for further size reduction with the incoming feed material.
A fan generates the airflow through the milling system and ensures dust free operation by keeping the plant under negative pressure.
Where appropriate, the incoming air stream can be heated for drying and grinding of the material at once. In addition, a “coarse discharge screw” can be incorporated into the upper section of the mill in order to extract a proportion of the partially ground material and produce a secondary product of intermediate fineness.
The Atlas roller mill by ECUTEC is the solution for the fine grinding and classification of a wide variety of materials including: Calcium Carbonate, Dolomite, Talc, Bentonite, Barites, Petroleum Coke, Calcium Oxide (Burnt Lime), Gypsum, etc.
Fine Classifier TC
The newly developed TC classifier and the Atlas roller mill combines perfectly for the production of fine and medium fine powders. The innovative rotor design reduces energy consumption without losing its ability to produce sharp cut points. The TC is an air stream classifier which provides an excellent precision of cut at a very low pressure drop and is ideal for economical production of fine materials in the d98< 30-250 μm range.
Turbo Classifier Scirocco
Where ultra-fine products are required the Atlas is combined with ECUTEC’s well established Scirocco classifier and in this arrangement d98 <6 μm products are achievable.
- Robust Design
- Bearing System Integrated into Mill Base
- Closed Milling Force Circuit
- Reduced Delivery Time and Competitive Pricing
- Lower Civil and Installation Costs
- Compact Plant Configuration
- Sharp and very Fine Top Cut (down to d98 < 6 μm)
- Low Specific Energy Consumption
- Low Wear Rates and easy Maintenance
- Simple Operation